View Full Version : Marco Polo Cabins on Baltic
Dickiemint
August 28th, 2011, 06:50 AM
We're in 248 and 252 on Baltic Deck. Could anyone comment on size, engine noise, etc, please?
We've previously cruised on Marco Polo on Atlantic deck. So we know the cabins are smaller than Carnival, etc!
Thanks.
Richard
hassop
December 3rd, 2011, 07:34 AM
Hi Richard...Did you get any answers?
Seems very difficult to get any info on Marco Polo. If you have been on your trip perhaps you could post your thoughts on noise and size of cabins.We are hoping to try her next year(2013)
wvdleek
December 7th, 2011, 03:26 AM
We're in 248 and 252 on Baltic Deck. Could anyone comment on size, engine noise, etc, please?
We've previously cruised on Marco Polo on Atlantic deck. So we know the cabins are smaller than Carnival, etc!
Thanks.
Richard
http://www.cruiseandmaritime.com/our-ship/cabin-information.aspx
Those cabins are in the rear of the ship, so you might feel some vibration.
You hardly hear any engine noise, but, in the corridor you might smell fuel.
mann overboard
December 10th, 2011, 07:59 AM
Perhaps too late for the OP, but we've just come off Marco Polo cabin 252.
We were just on for 4 nights and we found it had more than ample storage and was very clean. It is small with twin beds in an L shape. But there is enough space for two to get dressed at the same time. We did not find it particularly noisey.
Oh by the way, if you find any euros on the floor, they're mine!
Happy cruising
Bob & Doreen
hassop
December 10th, 2011, 01:15 PM
:DPerhaps too late for the OP, but we've just come off Marco Polo cabin 252.
We were just on for 4 nights and we found it had more than ample storage and was very clean. It is small with twin beds in an L shape. But there is enough space for two to get dressed at the same time. We did not find it particularly noisey.
Oh by the way, if you find any euros on the floor, they're mine!
Happy cruising
Bob & Doreen
Thanks for that Bob and Willem ......we are one deck directly above so hopefully just as quiet (334).
Will have to get the rod and line out for the money though:D
Regards H