Stevesan Posted November 8, 2013 #1 Share Posted November 8, 2013 Are there any "To Bayport" signs between I-45 and the terminal? Link to comment Share on other sites More sharing options...
TruckerDave Posted November 8, 2013 #2 Share Posted November 8, 2013 If you are on I45 here are some directions Take i45 south to i610 east. Pass I10 and cross over ship channel bridge (you won't miss the bridge). Make sure you are in the right lane on bridge as you will take TX225 east (the exit will be on your right as you start down the bridge) Take hwy 225 east till the end. Then take Tx 146 south (you and only go north or south on 146 as 225 ends there). Take the 4th exit (it will say bayport) . It is a big flyover ramp (it is the next exit after "shore acres" to give you some warning.) it is only a few miles from 225 to the exit. You will see a bunch of large oil tanks on the corner (I am typing this while sitting next to those tanks getting loaded). Sent using a small piece of fruit. Link to comment Share on other sites More sharing options...
TruckerDave Posted November 8, 2013 #3 Share Posted November 8, 2013 Port road is the exit. (Forgot to put this in my response above) Sent using a small piece of fruit. Link to comment Share on other sites More sharing options...
Stevesan Posted November 9, 2013 Author #4 Share Posted November 9, 2013 Thanks, Dave. I live in SW Houston, previously Alief. I have the Mapquest directions. I've found two other options from I-45 to Bayport from exits 25 or 26. They are the simplest, albeit longest, routes. I'm wondering if it's occurred to Bayport Terminal management to have direction signs posted along the side roads. The route you recommend is the shortest, but most complex. At my age, simple is good.:D BTW - A post from the first trip reported that only one lane was allocated for entering the parking lot, resulting in a half hour wait in line to enter. That included those who preordered. Link to comment Share on other sites More sharing options...
sminfiddle Posted November 9, 2013 #5 Share Posted November 9, 2013 I didn't get a shot of the exit signs from 146 South. The flyover The driveway in/out of the terminal property, after turning off of Port Rd Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now